16MM STRT SHK 3MM SHRINK FIT EXT

Item #: GM76502127
Manufacturer: Lyndex
Mfg #: ST16M-SF3-

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - .9900

$204.96

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BT40 1 x 3.94 - Shrink Fit Tool Holder

Item #: GM94BT40103949
Manufacturer: Parlec
Mfg #: BT40-10SF3

Technical Specifications:
*Bore Diameter: 1 *Brand Name: Parlec *Gage Length: 3.940 *Model Number: BT40-10SF394-9 *Shank: BT40 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 3.0000

$241.67

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BT30 1/8" Bore Dia. x 3.15 Gage Length Shrink Fit Toolholder

Item #: GM265057109
Manufacturer: Bilz
Mfg #: 5057109

Technical Specifications:
*Bearing Surface: 0.79 *Bore Diameter: 1/8" *Brand Name: Bilz *Gage Length: 3.15 *Outside Diameter: 0.79 *Shank: BT30 *Type: Shrink Fit Toolholder

Description:

Shipping Info:
*Actual Weight - 2.0000

$345.68

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 3/8"-5" - Shrink Fit Holder

Item #: TE1229023
Manufacturer: Techniks
Mfg #: 29023

Technical Specifications:
*Bore Diameter: 3/8 *Brand Name: Techniks *European-DIN Tool Shank Range: 9.5mm *Gage Length: 5 *Outside Diameter: 2.5 *Shank: 3/8 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 3/8

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .2068

$272.26

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/4 STRT SHK 5/16 SHRINK FIT EXT

Item #: GM76502139
Manufacturer: Lyndex
Mfg #: ST75-SF031

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - .9900

$192.72

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1/4"-3.5" - Shrink Fit Holder wih Port

Item #: TE1229011FB
Manufacturer: Techniks
Mfg #: 29011FB

Technical Specifications:
*Bore Diameter: 1/4 *Brand Name: Techniks *European-DIN Tool Shank Range: 6.4mm *Gage Length: 3.5 *Outside Diameter: 2.5 *Shank: 1/4 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 1/4

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *CoolFLEX (DIN B) Coolant through the flange as well as through the spindle *CoolBLAST allows for in-the-bore coolant delivery onto the work piece *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .1562

$341.60

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BT40 3/16 x 3.54 - Shrink Fit Tool Holder

Item #: GM94BT40183549
Manufacturer: Parlec
Mfg #: BT40-18SF3

Technical Specifications:
*Bore Diameter: 3/16 *Brand Name: Parlec *Gage Length: 3.540 *Model Number: BT40-18SF354-9 *Shank: BT40 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 3.0000

$241.67

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 5/8"-6" - Shrink Fit Holder

Item #: TE12290626
Manufacturer: Techniks
Mfg #: 29062-6

Technical Specifications:
*Bore Diameter: 5/8 *Brand Name: Techniks *European-DIN Tool Shank Range: 15.9mm *Gage Length: 6 *Outside Diameter: 3.88 *Shank: 5/8 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 5/8

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - 1.0000

$394.62

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1/4"-6" - Shrink Fit Holder

Item #: TE1229014
Manufacturer: Techniks
Mfg #: 29014

Technical Specifications:
*Bore Diameter: 1/4 *Brand Name: Techniks *European-DIN Tool Shank Range: 6.4mm *Gage Length: 6 *Outside Diameter: 2.5 *Shank: 1/4 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 1/4

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .1931

$289.59

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BT40 3/4 x 3.54 - Shrink Fit Tool Holder

Item #: GM94BT40753549
Manufacturer: Parlec
Mfg #: BT40-75SF3

Technical Specifications:
*Bore Diameter: 3/4 *Brand Name: Parlec *Gage Length: 3.540 *Model Number: BT40-75SF354-9 *Shank: BT40 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 3.0000

$241.67

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1-1/4"-4" - Shrink Fit Holder

Item #: TE1229046
Manufacturer: Techniks
Mfg #: 29046

Technical Specifications:
*Bore Diameter: 1-1/4 *Brand Name: Techniks *European-DIN Tool Shank Range: 31.8mm *Gage Length: 4 *Outside Diameter: 2.5 *Shank: 1-1/4 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 1-1/4

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .2893

$263.08

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK 63A 1/4"-80mm - Shrink Fit Holder - Slim Line

Item #: TE1273548
Manufacturer: Techniks
Mfg #: 73548

Technical Specifications:
*Bore Diameter: 1/4 *Brand Name: Techniks *European-DIN Tool Shank Range: 6.4mm *Gage Length: 80mm *Outside Diameter: 2.48 *Shank: 1/4 *Standard: ISO 1940 *Type: Shrink Fit HSK Holder *USA-ANSI Tool Shank Range: 1/4

Description:
*Smaller nose diameter than traditional ShrinkFIT designs *Maximum T.I.R. onlly 0.0001" *Balanced to 25,000 RPM at G2.5 tolerance *Great for finish passes where small nose diameter tooling is required *Coolant through spindle with coolant set screw comes standard *Each holder is certified for accuracy and balance and comes with it's own lab report

Shipping Info:
*Actual Weight - .1093

$273.28

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

16-3mm Shrink Extension

Item #: HA7178160032
Manufacturer: Haimer USA LLC
Mfg #: 78.160.03.

Technical Specifications:
*Bore Diameter: 3mm *Brand Name: Haimer USA LLC *Gage Length: 160mm *Model Number: 78.160.03.2 *Outside Diameter: 10m *Type: Shrink Fit Extension

Description:
*Straight shank shrink fit extention *Can accommodate any style holder *Highest Possible Clamping Force *< 3-micron T.I.R. *Works with collet holders, mill chucks, hydraulic holders and shink fit holders

Shipping Info:
*Actual Weight - .3300

$360.97

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1" CAT 40 Shrink Fit Toolholder - 2.75" Gauge Length

Item #: GM30100275
Manufacturer: Briney
Mfg #: V40SF-100-

Technical Specifications:
*Bearing Surface: 1.250 *Bore Diameter: 1 *Brand Name: Briney *Gage Length: 2.750 *Outside Diameter: 1.750 *Shank: CAT40 *Standard: ANSI *Type: CV Shrink Fit

Description:
*Materials certified and traceable to NIST standards *360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity *Balanced to 20,000 RPM at G2.5 *Maximum .0002? T.I.R. or better *Certified H-13 material

Shipping Info:
*Actual Weight - 2.6000 *Dimensions - Height: 2.87 Length: 7.75 Width: 2.87

$270.22

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 3/8 x 3.15 - Shrink Fit Tool Holder

Item #: GM94C40383159
Manufacturer: Parlec
Mfg #: C40-38SF31

Technical Specifications:
*Bore Diameter: 3/8 *Brand Name: Parlec *Gage Length: 3.150 *Model Number: C40-38SF315-9 *Shank: CAT40 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 3.0000

$268.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

5/8" TO 3/16" - Shrink Fit Extension

Item #: TE1286064
Manufacturer: Techniks
Mfg #: 86064

Technical Specifications:
*Bore Diameter: 3/16 *Brand Name: Techniks *European-DIN Tool Shank Range: 4.8mm *Outside Diameter: 5/8 *Shank: 3/16 *Standard: ISO 1940 *Type: Shrink Fit Straight Shank Extension *USA-ANSI Tool Shank Range: 3/16

Description:
*Extend the reach of your existing holders *Better rigidity and T.I.R. extends tool life *Works with a variety of tool holders

Shipping Info:
*Actual Weight - .0281

$216.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 3/4 x 3.15 - Shrink Fit Tool Holder

Item #: GM94C50753159
Manufacturer: Parlec
Mfg #: C50-75SF31

Technical Specifications:
*Bore Diameter: 3/4 *Brand Name: Parlec *Gage Length: 3.150 *Model Number: C50-75SF315-9 *Shank: CAT50 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 8.0000

$327.32

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/2" CAT 40 Shrink Fit Toolholder - 2.75" Gauge Length

Item #: GM3050275
Manufacturer: Briney
Mfg #: V40SF-050-

Technical Specifications:
*Bearing Surface: 1.000 *Bore Diameter: 1/2 *Brand Name: Briney *Gage Length: 2.750 *Outside Diameter: 1.250 *Shank: CAT40 *Standard: ANSI *Type: CV Shrink Fit

Description:
*Materials certified and traceable to NIST standards *360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity *Balanced to 20,000 RPM at G2.5 *Maximum .0002? T.I.R. or better *Certified H-13 material

Shipping Info:
*Actual Weight - 3.0000

$270.22

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1"-3" - Shrink Fit Holder

Item #: TE1229040
Manufacturer: Techniks
Mfg #: 29040

Technical Specifications:
*Bore Diameter: 1.0 *Brand Name: Techniks *European-DIN Tool Shank Range: 25.4mm *Gage Length: 3 *Outside Diameter: 2.5 *Shank: 1.0 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 1.0

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .2618

$263.08

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1" TO 1/2" - Shrink Fit Extension

Item #: TE1286092
Manufacturer: Techniks
Mfg #: 86092

Technical Specifications:
*Bore Diameter: 1/2 *Brand Name: Techniks *European-DIN Tool Shank Range: 12.7mm *Outside Diameter: 1 *Shank: 1/2 *Standard: ISO 1940 *Type: Shrink Fit Straight Shank Extension *USA-ANSI Tool Shank Range: 1/2

Description:
*Extend the reach of your existing holders *Better rigidity and T.I.R. extends tool life *Works with a variety of tool holder

Shipping Info:
*Actual Weight - .0687

$236.57

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It